Today, manufacturers produce pallet trucks a large number of models of different modifications. What is the reason the appearance of such a variety of pallet trucks and how to make the right choice, let to tell in this article. The first thing you should pay attention – this capacity hydraulic truck. So the standard models are available with capacity from 2 to 2.5 tons. In the market there, as a lifting trolleys and lifting less. Remember that the more the weight of the load lying on the forks, the harder it is to transport this cart, so when buying art is guided by rules of reasonable necessity. More a lot of important factors is – the width of the pitchfork. Different countries have different pallet trucks fork width, it is connected, of course, with different sizes of pallets common in one country or another. Incyte gathered all the information.
When choosing remember the trolley, we adopted the standards and the right choice is not difficult. So one of the leading options is to fork length hydraulic cart. Today, manufacturers produce trucks with short and long pitchforks. For the standard adopted by the length of 1150 mm. Trolleys with non-standard forks have their advantages: for example a hydraulic trolley with a fork about 800 mm is very convenient to use in confined spaces, working with such a cart should be on the side.
Pallet trucks with forks long 2,000 mm makes it possible to carry two pallets at a time, only to remember that the loading capacity of these models below standard. If you have to work with pallets, custom sizes, requiring the use of carts with low height above the floor in the folded position, we recommend that you pay attention to the model of low-profile pallet trucks. Very often exploitation of colored carts is not allowed, for example in the food industry. If this is your case, you should pay attention to the special galvanized and stainless steel pallet trucks. But remember that galvanized carriage often can not always meet the necessary hygiene standards, although far superior to these figures painted model. For example, in the fishery industry, where he actively apply salt may be used only with the cart, stainless steel. More attention should be paid to cover the use of rollers. The most commonly used are two options: nylon rollers and rollers with polyurethane tires. Nylon rollers slightly lower in cost and suitable for use on smooth surfaces, floors. They are highly resistant to many corrosive substances and normal conditions of use does not require special care. Rollers with polyurethane coating on the bus come in handy with minor irregularities. They are resistant to strong shock and have high durability and resistance to cuts. This role is characterized by high ride, low noise when driving. It should be borne in mind that the use of standard pallet trucks on the slope strongly should be avoided in order to avoid injuries such cases should be used trucks equipped with reliable brakes. When you purchase a hydraulic truck purchase, inspect, check the workmanship model. As in any other segment of the market, many sellers have in their carts range of questionable quality. Do not forget the wise words – miser pays twice. Make a reasonable choice of the manufacturer. Among the many producers, the quality stand Lema Engineering (Poland) and Otto-Kurtbach (Germany). Their technique has long been known for a warehouse in the Russian market, has a good record, dlgovechna. If you chose the technology from another company, not Remember to read the documentation, once again reminded to check the quality.